Qedit 6.0 for HP e3000

User Manual

Doc-To-Help Standard Manual

Robelle Solutions Technology Inc.

Description: qed-ybo


Program and manual copyright 1977-2015 Robelle Solutions Technology Inc.

Permission is granted to reprint this document (but not for profit), provided that copyright notice is given.

Updated on January 14, 2015

 

 

Qedit and Suprtool are trademarks of Robelle Solutions Technology Inc. Windows is a trademark of Microsoft Corporation. Other product and company names mentioned herein may be the trademarks of their respective owners.

Description: robelle

Robelle Solutions Technology Inc.

7360 – 137 Street, Suite 372

Surrey, B.C. Canada V3W 1A3

Phone: 604.501.2001

Fax:     604.501.2003

E-mail: sales@robelle.com

E-mail: support@robelle.com

Web:    www.robelle.com

 


Contents

Welcome to Qedit                                                                                                      1

Introduction........................................................................................................... 1

Documentation....................................................................................................... 2

User Manual.......................................................................................... 2

Other Documentation............................................................................................... 2

Printdoc Program................................................................................... 2

Other Manuals of Interest..................................................................... 2

Customer Support................................................................................................... 3

Robelle Newsletter.................................................................................................. 3

QLIB and Bonus Contributed Software....................................................................... 3

Notation................................................................................................................ 4

Highlights In Version 6.0......................................................................................... 5

Highlights In Version 5.9......................................................................................... 5

Highlights In Version 5.8......................................................................................... 5

Highlights In Version 5.7......................................................................................... 6

Installing Qedit                                                                                                            7

General Installation Notes......................................................................................... 7

Who Should Use These Instructions?................................................... 7

Summary of Installation Steps.............................................................. 7

Qedit Compiler Interfaces..................................................................... 7

Important Note About Passwords........................................................ 8

STREAMX Users................................................................................. 8

Step 1: Install Qedit................................................................................................ 8

Step 2: Install QLIB and Bonus Programs................................................................. 10

Building the Spell Dictionary.............................................................. 10

Step 3: Install NM Compiler Interface....................................................................... 11

Installing the Interface......................................................................... 11

Compiling Instructions........................................................................ 11

Step 4: Install CM Compiler Interface....................................................................... 12

Choosing a CM Installation Method................................................... 12

Integrating CM Compiler Changes...................................................... 12

Isolating CM Compiler Changes......................................................... 13

Step 5: Saving Disc Space...................................................................................... 13

Purging Obsolete Files......................................................................... 13

Minimal Set of Files............................................................................ 13

Moving Qedit to Another Account........................................................................... 14

Moving All the Files............................................................................ 15

Redirecting the File Names.................................................................. 15

Moving a "Hooked" Qedit................................................................... 15

Running the MPEXHOOKed Qedit................................................... 16

Removing the Compiler Interface............................................................................. 17

Removing the NM Interface................................................................ 17

Removing the Integral CM Interface................................................... 17

Removing the Isolated CM Interface................................................... 18

Getting a Quick Start with HP Full-Screen Editing                                           19

Introduction......................................................................................................... 19

Starting Visual Mode............................................................................................. 20

Screen Layout....................................................................................................... 21

Home Line........................................................................................... 21

Status Line........................................................................................... 21

Text Lines............................................................................................ 22

Template Line...................................................................................... 22

Special Indicator Columns................................................................... 22

Using Your Keyboard............................................................................................ 23

Moving the Cursor.............................................................................. 23

Editing the Text Lines.......................................................................... 23

Control Functions................................................................................ 24

Reflection for DOS Keyboards........................................................... 24

Other PC Keyboards........................................................................... 25

Function Keys...................................................................................................... 25

Browsing Through Your File.................................................................................. 27

Cut-and-Paste....................................................................................................... 28

Cutting Operations.............................................................................. 28

Pasting Operations.............................................................................. 28

Resetting Cut-and-Paste...................................................................... 29

Copying a Block of Text..................................................................... 29

Cut-and-Paste Between Files.............................................................. 30

Dividing and Gluing Operations.......................................................... 30

Dividing Lines in Visual Mode............................................................ 30

Gluing Lines in Visual Mode............................................................... 31

Excluding Lines From Visual Mode Display....................................... 31

Justifying Lines in Visual Mode.......................................................... 32

Renumbering Lines.............................................................................. 32

Inserting Blank Lines........................................................................... 32

Hold Files............................................................................................ 32

Marking Changes Without Using Line Numbers................................. 33

Paste from a Non-Qedit File................................................................ 33

Home Line Commands.......................................................................................... 34

Finding Strings..................................................................................... 34

Changing Strings.................................................................................. 35

Help on Visual Mode.......................................................................... 35

Compile, Link, and Run....................................................................... 35

Formatting Paragraphs......................................................................... 36

Undoing Changes in Visual Mode....................................................... 36

Refreshing the Screen........................................................................... 36

Other Line Mode Commands.............................................................. 37

Truncated Home Line.......................................................................... 37

Exit from Visual................................................................................... 37

Getting a Quick Start with Line Mode Editing                                                   39

Introduction......................................................................................................... 39

Adding Lines to a File........................................................................................... 39

Looking at the File................................................................................................ 40

Browsing the File................................................................................................. 41

Searching the File................................................................................................. 41

Editing Lines....................................................................................................... 42

Global Changes.................................................................................................... 43

Copying Lines...................................................................................................... 45

Moving Lines....................................................................................................... 45

Deleting Lines...................................................................................................... 46

Help Command.................................................................................................... 46

Saving the File..................................................................................................... 47

Open and Shut for Instant Access............................................................................. 47

Running Qedit under MPE                                                                                      49

Introduction......................................................................................................... 49

Edit in Line Mode or in Full-Screen Mode................................................................ 49

Edit Several Files at Once....................................................................................... 50

Qeditmgr Configuration Files.................................................................................. 50

Limiting Compile Priority................................................................... 51

Default Set Commands........................................................................ 51

Using Qedit in Batch............................................................................................. 52

Summary of Parm= Values..................................................................................... 52

From the Posix Shell............................................................................ 53

Exit and Entry Options.......................................................................................... 53

Exit with Verify................................................................................... 53

Info= First File to Edit........................................................................ 54

Random Name for Primary Scratch File.............................................. 54

"Discard Changes?" on Exit................................................................. 54

Info= "-p 99" Specifies Parm Value.................................................... 55

Info= "-c cmdstring"............................................................................ 55

Parm 512 to Edit a Single File.............................................................. 56

Info= An Empty File to Fill................................................................ 56

Info= Temporary File.......................................................................... 56

Info= Can Create New Files................................................................ 57

Parm Values to Suspend or Not.......................................................... 57

Info= Commands Only........................................................................ 57

Basicentry Option............................................................................... 58

JCWs That Drive Qedit......................................................................................... 58

RCRTMODEL JCW........................................................................... 59

RPCVERSION JCW........................................................................... 61

RCRTWIDTH JCW............................................................................ 61

RCRTSTRAPSGH for Handshaking.................................................. 62

RLABELDEFAULT JCW.................................................................. 64

QEDITMGRTRACE JCW................................................................. 64

QEDPARMBITS JCW....................................................................... 65

QEDCURWFILE Variable.................................................................. 65

QEDSTOREDPWD and QEDPROMPTEDPWD Variables............. 65

Qedit for Microsoft Windows                                                                               67

Introduction......................................................................................................... 67

Server Process...................................................................................................... 67

Logon Sequence................................................................................... 67

QEDSERVMODE JCW...................................................................... 68

Log Files............................................................................................................. 69

Qedit Issues and Solutions                                                                                   71

Running Qedit with Reflection................................................................................ 71

RPCVERSION JCW........................................................................... 71

Using a Command File to Start Up..................................................... 71

Alt-Y vs. :Reflect................................................................................. 72

Qedit and Reflection File Transfers..................................................... 72

Form Feed Causing Return/Line Feed................................................. 73

Typeahead and Visual Mode............................................................... 74

Completion Codes............................................................................... 74

Controlling the PC............................................................................... 74

Accidental Exit from Reflection........................................................... 74

Changing the Exit Keystroke............................................................... 75

Running Qedit in MPE/iX...................................................................................... 76

Unresolved Externals on MPE/iX 4.0................................................. 76

Compiling on MPE/iX......................................................................... 76

XDB: the Symbolic Debugger............................................................. 76

Command Files and Variables.............................................................. 77

Visual Mode........................................................................................ 77

EOF vs. LIMIT................................................................................... 77

Disc Space for Files and Xltrim........................................................... 77

Extents................................................................................................. 78

Qedit as the HPDesk Editor.................................................................................... 78

Configuring HPDesk............................................................................ 78

Configuring Qedit in HPDesk.............................................................. 79

DeskQed.............................................................................................. 79

Getting Programs to Read Qedit Files....................................................................... 80

Qinput................................................................................................. 80

Qcompxl.............................................................................................. 80

Qeditaccess Subroutine........................................................................ 81

Qedify.................................................................................................. 81

Qedify and $Include............................................................................ 82

Editing Wide Files................................................................................................ 83

Using the New Command.................................................................... 83

Using the Text Command.................................................................... 83

Lines, Strings and Ranges...................................................................................... 84

Using Qedit with MPE Programming Languages                                            87

Introduction......................................................................................................... 87

Editerr: Trapping Compiler Errors............................................................................ 87

Limitations and Restrictions................................................................ 88

Linking PowerHouse with Qedit.............................................................................. 89

Invoking PowerHouse from Qedit....................................................... 90

Configuring Qedit as Your Editor........................................................ 91

Editing PowerHouse Subfiles.............................................................. 92

COBOL.............................................................................................................. 92

Selecting a Compiler............................................................................ 92

Sequence Numbers and Comments...................................................... 92

Tagging Source Changes....................................................................... 93

Copylib Members............................................................................... 93

Trapping Syntax Errors....................................................................... 94

FORTRAN.......................................................................................................... 94

Pascal................................................................................................................. 94

C Language.......................................................................................................... 95

SPL.................................................................................................................... 95

TRANSACT....................................................................................................... 96

RPG................................................................................................................... 96

BASIC................................................................................................................ 97

Segmenter............................................................................................................ 97

Common Uses of Qedit                                                                                          99

Introduction......................................................................................................... 99

Qedit as Word Processor........................................................................................ 99

QNote UDC for Occasional Memos................................................... 99

Justify Capability.............................................................................. 100

Check Spelling................................................................................... 100

Prose: A Text Processor.................................................................... 101

Using TDP from within Qedit........................................................... 102

Qedit as a File Utility.......................................................................................... 102

Sorting a Range of Lines.................................................................... 103

Searching Groups of Files for Strings................................................ 103

Editing Data Files.............................................................................. 104

Editing Program Files......................................................................... 107

Qedit as an Operations Tool.................................................................................. 107

Editing Stream Files........................................................................... 107

Native-Mode Output Spool Files..................................................... 107

Editing Bells, Tabs and Escapes........................................................ 108

Aborting All Users to Back Up......................................................... 108

Qedit Commands                                                                                                  111

Introduction........................................................................................................ 111

General Notes..................................................................................................... 111

Abbreviations.................................................................................... 111

Uppercase or Lowercase................................................................... 112

Multiple Commands per Line........................................................... 112

Comments on Command Lines.......................................................... 112

STREAMX Warning......................................................................... 113

Stopping Commands with Control-Y................................................ 113

Implicit Commands........................................................................... 113

Function Keys................................................................................... 114

Command Files and UDCs................................................................ 114

MPE Commands............................................................................... 115

Differences from MPE...................................................................... 115

Calculator Commands........................................................................ 116

QEDITCOUNT JCW....................................................................... 116

QEDCURWFILE Variable................................................................ 116

External Program Commands............................................................. 116

:Activate Command [AC/:A]................................................................................. 117

Add Command [A].............................................................................................. 118

Add (Adding New Lines).................................................................. 118

Add (Adding a String as a Line)......................................................... 120

Add (Copying Lines within a File).................................................... 121

Add (Moving Lines within a File)..................................................... 122

Add (Copying Lines Between Files)................................................. 123

Append Command [AP]....................................................................................... 124

Backward Command [BA/F5]................................................................................ 125

Before Command [B]........................................................................................... 126

:Beginfile and :Endfile Commands.......................................................................... 128

Change Command [C].......................................................................................... 129

Change (Changing Strings)................................................................. 129

Change (Changing Columns).............................................................. 132

Close Command [CL].......................................................................................... 134

Colcopy Command  [COL]................................................................................... 135

Colmove Command  [COLM]............................................................................... 138

:Compile Command [CO/:C]................................................................................ 141

Delete Command [D]........................................................................................... 145

Destroy Command [DES/:D]................................................................................. 147

:Display Command [DISPLAY]............................................................................. 148

Divide Command [DI].......................................................................................... 149

:Do Command [DO]............................................................................................ 150

:Editerror Command [EDITERROR]...................................................................... 151

:Escape Command [ESCAPE]............................................................................... 153

Exit Command [E/F8].......................................................................................... 154

Find Command [F/F4]......................................................................................... 155

Findup Command [FINDU/F3].............................................................................. 157

Form Command [FORM]..................................................................................... 158

Forward Command [FO/F6].................................................................................. 159

Garbage Command [GAR].................................................................................... 160

Glue Command [G]............................................................................................. 162

Help Command [H/?]........................................................................................... 164

Hold Command [HO]........................................................................................... 166

:If, :Endif, :Else, :Elseif Commands........................................................................ 168

Justify Command [J]............................................................................................ 169

Keep Command [K]............................................................................................. 176

:Kill Command [KI/:K]........................................................................................ 180

List Command [L]............................................................................................... 181

:Listredo Command [LISTREDO/F7]..................................................................... 196

:Listundo Command [LISTU]............................................................................... 197

Lsort Command [LS]........................................................................................... 198

Merge Command [ME]......................................................................................... 199

Modify Command [M]......................................................................................... 201

New Command [N].............................................................................................. 214

Open Command [O]............................................................................................. 216

:Pause Command [PAUSE]................................................................................... 220

:Prep Command [PREP/:P]................................................................................... 221

Proc Command [P].............................................................................................. 224

Q Command [Q]................................................................................................. 227

/Qedit Command................................................................................................. 228

:Qhelp Command [QHELP].................................................................................. 229

:Redo Command [REDO]..................................................................................... 230

:Reflect Command [REFLECT]............................................................................. 232

Renumber Command [REN].................................................................................. 235

Replace Command [R]......................................................................................... 236

:Return Command [RETURN].............................................................................. 238

:Run Command [RU/:R]...................................................................................... 239

Run, Implied...................................................................................................... 243

:Segmenter Command [SEG/:S]............................................................................. 244

Set Command [S]................................................................................................ 245

Account............................................................................................. 247

Alias................................................................................................... 248

Autocont............................................................................................ 250

Check................................................................................................. 250

Decimal.............................................................................................. 251

DL size.............................................................................................. 251

Editinput............................................................................................ 252

Expandtabs........................................................................................ 253

Extentsize.......................................................................................... 253

Extprog.............................................................................................. 253

Filename............................................................................................. 254

FORTRAN........................................................................................ 254

HFS.................................................................................................... 255

Halfbright........................................................................................... 256

Hints.................................................................................................. 256

Hppath.............................................................................................. 256

Increment........................................................................................... 256

Interactive.......................................................................................... 257

Justify................................................................................................ 257

Keep.................................................................................................. 258

Language............................................................................................ 263

Left.................................................................................................... 266

Length................................................................................................ 267

Lib...................................................................................................... 267

Limits................................................................................................. 267

List..................................................................................................... 268

Maxdata............................................................................................. 269

Modify.............................................................................................. 269

Open.................................................................................................. 271

Pattern............................................................................................... 272

Priority.............................................................................................. 272

Prompt............................................................................................... 273

Redo................................................................................................... 273

Right.................................................................................................. 275

RL file name....................................................................................... 275

Shift................................................................................................... 275

Spell................................................................................................... 276

Statistics............................................................................................ 277

Stringdelimiters.................................................................................. 277

Suspend............................................................................................. 278

Tabs................................................................................................... 279

Term.................................................................................................. 279

Text.................................................................................................... 280

Totals................................................................................................. 282

UDC.................................................................................................. 282

Undo.................................................................................................. 283

Varsub................................................................................................ 283

Visual................................................................................................. 284

Warnings............................................................................................ 297

Whichcomp........................................................................................ 297

Window............................................................................................. 298

Work.................................................................................................. 299

Wraparound....................................................................................... 301

X........................................................................................................ 302

YNone................................................................................................ 306

Zip..................................................................................................... 306

Shut Command [SH]........................................................................................... 308

Spell Command [SP]........................................................................................... 310

:Stream Command [STREAM].............................................................................. 312

:Tdpfinal and :Tdpdraft Commands........................................................................ 313

Text Command [T]............................................................................................. 314

Undo Command [UN].......................................................................................... 322

Up Command [UP/F2]......................................................................................... 324

Use Command [U]............................................................................................... 325

Verify Command [V]............................................................................................ 326

Visual Command [VI/F1]..................................................................................... 327

:While and :Endwhile Commands.......................................................................... 329

Words Command [W].......................................................................................... 330

:Xltrim Command [XLTRIM]............................................................................... 331

Zave Command [Z].............................................................................................. 332

ZZ Command..................................................................................................... 333

User Defined Commands....................................................................................... 334

Command Files.................................................................................................. 339

Calculator Command [=]...................................................................................... 343

POSIX Commands [!].......................................................................................... 346

Troubleshooting and Error Messages                                                             347

Introduction........................................................................................................ 347

Messages........................................................................................................... 347

System Errors..................................................................................................... 350

Quit Errors......................................................................................................... 351

Errors in Visual................................................................................................... 351

Using Visual with X.25..................................................................... 351

Using Visual on MPE/iX................................................................... 351

Accidental Invocation of MPE/iX CI................................................ 351

Using Visual on HP-UX.................................................................... 352

Terminals Supported by Visual......................................................... 352

Problems with 700/9x Terminals....................................................... 352

Visual Error Messages....................................................................... 353

Analyzing Compiler Problems............................................................................... 355

QCOMPXLTRACE JCW................................................................ 356

Control-Y and NM Compiles............................................................ 356

How to Bypass Qcompxl.................................................................. 356

Problems with HP's C Compiler....................................................... 356

Unresolved External Reference.......................................................... 357

Illegal Characters................................................................................ 357

Pascal/V Compiler Stack Overflow................................................... 357

File Formats                                                                                                            359

Introduction........................................................................................................ 359

Qedit Workfiles................................................................................................... 359

Original Format Workfiles.................................................................................... 359

Jumbo Workfiles................................................................................................. 360

External Files..................................................................................................... 361

Error Files for Editerror......................................................................................... 364

Prefix Characters & Data................................................................... 364

User Routines                                                                                                        367

Introduction........................................................................................................ 367

Wide Lines and User Procedures............................................................................ 367

"Init" Interface Procedure....................................................................................... 368

"Com" Interface Procedure..................................................................................... 369

"Add" Interface Procedure...................................................................................... 370

"Exit" Interface Procedure...................................................................................... 371

Installing Your Interface Procedures......................................................................... 371

Alternate Activation............................................................................................. 372

The Modify User Hook......................................................................................... 373

Writing a User Procedure...................................................................................... 373

DL Space........................................................................................................... 374

Passing Procspace Values...................................................................................... 374

Communication Flags for User Code....................................................................... 375

Qcopy                                                                                                                       377

Introduction........................................................................................................ 377

Accessing Qcopy................................................................................................. 377

Qcopy Documentation.......................................................................................... 378

Qedit-Compatible Software Tools                                                                     379

Introduction........................................................................................................ 379

Compare/iX........................................................................................................ 379

OMNIDEX......................................................................................................... 380

Adager............................................................................................................... 380

CCS - Corporate Computer Systems....................................................................... 380

Reflection........................................................................................................... 380

ROBOT............................................................................................................ 381

PowerHouse....................................................................................................... 381

Splash for Native-Mode SPL................................................................................. 381

Documentation/3000............................................................................................ 381

Prose Text Formatter........................................................................................... 381

Spell: Spelling Checker........................................................................................ 382

Qhelp Help System.............................................................................................. 382

TRANSACT...................................................................................................... 382

MPEX and STREAMX........................................................................................ 382

SCOMPARE and ANALYZER............................................................................. 383

Xpedit Full-Screen Editor..................................................................................... 383

Nuggets............................................................................................................. 383

Fantasia............................................................................................................. 384

TDP................................................................................................................. 384

Network Engine.................................................................................................. 384

Regular Expressions                                                                                            385

Introduction........................................................................................................ 385

Metacharacters..................................................................................................... 385

Character Class................................................................................................... 387

Escape Character.................................................................................................. 389

Escaped Sequences in Regular Expressions............................................................... 390

Backreferences in Regular Expressions..................................................................... 391

Escaped Characters in Replacement String................................................................ 392

Qedit Glossary                                                                                                       393

Introduction........................................................................................................ 393

Terms............................................................................................................... 393

Abbreviating...................................................................................... 393

Batch.................................................................................................. 393

Calculator........................................................................................... 394

Column.............................................................................................. 394

Command........................................................................................... 395

Control Character.............................................................................. 395

Copylib Members............................................................................. 396

CRT................................................................................................... 396

Current Line....................................................................................... 396

Defaults............................................................................................. 397

External File....................................................................................... 397

File Names......................................................................................... 398

Full-Screen Editing............................................................................. 399

Hold File............................................................................................ 399

J Option............................................................................................. 399

Jumbo Files........................................................................................ 399

Keep File........................................................................................... 400

Language............................................................................................ 400

Left.................................................................................................... 400

Length................................................................................................ 400

Line.................................................................................................... 401

Linenum............................................................................................. 401

Looping.............................................................................................. 402

Margins.............................................................................................. 402

Member............................................................................................. 402

Memory Lock.................................................................................... 402

MPE Command................................................................................. 403

Patterns.............................................................................................. 403

Procedure........................................................................................... 404

Qeditscr............................................................................................. 404

Quiet-Q Option................................................................................. 405

Range................................................................................................. 405

Rangelist............................................................................................ 406

Relative Line Numbers...................................................................... 407

Right.................................................................................................. 408

Shifting............................................................................................... 408

Size.................................................................................................... 408

Spool Files......................................................................................... 408

$Stdin / $Stdinx.................................................................................. 409

$Stdlist............................................................................................... 409

String.................................................................................................. 409

Tab..................................................................................................... 410

Template-T Option........................................................................... 410

UDC.................................................................................................. 410

Visual Editing..................................................................................... 410

Window............................................................................................. 410

Workfile............................................................................................. 412

Special Characters................................................................................................ 412

? Means Help, Nonprinting Characters, Alphanumeric (in Patterns) or Optional (in Regexp).............................................................................................. 412

$ Means Hex, Standard File, Memory Lock, List Option, Previous File or End-Of-Line (in Regexp)................................................................................. 413

^ Means Findup, Control-Char, Start-of-line (in Regexp) or Negate (in Regexp)........................................................................................................... 414

. Means Nonprinting, Reset, Decimal Point or Any Character (in Regexp)  414

! Means Posix Command or Too Long.............................................. 415

% Means Octal or String................................................................... 415

* Means Current, Refresh, Multiply or Quantifier (in Regexp)....... 415

\ Means Previous, String, Literal Match (in Regexp) or Special Characters (in Regexp)........................................................................................................... 416

/ Means Prompt, Range Delimiter, Stop, Exit, or Divide.................. 417

[ Means FIRST, [default] or Start Class (in Regexp)........................ 417

] Means LAST or End Class (in Regexp).......................................... 417

{ } Are for Comments or Indentation............................................... 418

@ Means ALL................................................................................... 418

& Means Literal Match or Continue MPE Command...................... 418

: Means MPE or String...................................................................... 419

; Means Multiple Commands............................................................ 419

, Means a List.................................................................................... 419

= Means Copy or Calculate.............................................................. 420

< Means Move, I/O Redirection or Backward Page.......................... 420

> Means Forward Page, I/O Redirection, Modify or Qhelp............. 420

" Means String................................................................................... 421

( Means Start Parameter, Member, Command or Subpattern (in Regexp)     421

) Means End Parameter, Member, Command or Subpattern (in Regexp)      421

+ Means Ahead Some Lines, Add or Quantifier (in Regexp)............ 422

- Means Back Some Lines, Minus or Range (in Regexp).................. 422

# Means Numeric Pattern, Spool File or Previous Result................. 423

~ Means Spaces (Pattern), Recent Page or Field............................... 423

How to Contact Robelle                                                                                       425

Introduction........................................................................................................ 425

Index                                                                                                                         427

 


Welcome to Qedit

Introduction

Welcome to Qedit, the fast, full-screen text editor for MPE and HP-UX. To get into Qedit, enter this MPE command:

:run qedit.pub.robelle

Qedit version 5.7 has screen-editing, function keys and commands:

Commands:

Add

FINDUp

Open

ZZ

Add(=copy)

FORM

Proc

%ext

Add(<move)

FORward

Q

shell

Add(=file)

GARbage

REDO

 

Append

Glue

RENum

 

BAckward

Help

Replace

 

Before

HOld

Set

 

Change

Justify

SHut

 

COLcopy

Keep

SPell

 

COLMove

List

Text

 

Delete

LISTREDO

UNDo

COmp

DEStroy

LISTUndo

Use

RUN

Divide

LSort

Verify

Mpe

DO

MErge

VIsual

Udc

Exit

Modify

Words

Cmdfile

Find

New

Zave

=calc

Function Keys:

F1 Upd Next/Visual

F2 Roll Up

F3 Findup

F4 Find

F5 Backward

F6 Forward

F7 Do ===>
/LISTREDO

F8 Exit

 

Documentation

Qedit comes with a User Manual and a Change Notice. You may have received printed copies of these. If you wish to have printed copies, you can order them by filling out the form on our web site.

They are also available as PDF or HTML files. You can download the files from the Robelle web site at: http://www.robelle.com/library/manuals/.

User Manual

The user manual contains the full description of all the Qedit commands, as well as usage tips. The manual is up-to-date with all the latest changes incorporated in Qedit.

Other Documentation

In addition to the Qedit User Manual and Qedit Change notice, there are other  manuals that come with Qedit. Manuals for bonus programs and the contributed library are available in Robelle's Prose format, not in PDF format. They are found  in the Robelle account on the HP e3000, and are printed using the Printdoc  program. Printdoc prints the manual on your printer, whether LaserJet or line printer.

Printdoc Program

To print them on your printer, whether LaserJet or line printer, run the Printdoc program.

:run printdoc.pub.robelle

Printdoc is menu-driven, and very easy to use. Printdoc asks you for information, and if you are not sure of your answer, you can ask for help by typing a question mark (?) and pressing the Return key. There are two steps for printing a manual: first, choose one of the manuals on the menu; second, select a printer. Printdoc supports most types of LaserJet printers and regular line printers.

Other Manuals of Interest

You may want to print at least one copy of these manuals:

prose.qlibdoc.robelle     {text formatter}

spell.doc.robelle         {Bonus spelling checker}

contents.qlibdoc.robelle  {contributed library}

howmessy.doc.robelle      {Bonus database analyzer}

You can print any Robelle document if you know the file name. If you wish, you can include the file name in the :Run command. For example, to print the Spell User Manual, type

:run printdoc.pub.robelle;info="spell.doc.robelle"

Customer Support

When you purchase Qedit, customer support is included for the first year. After the first year, there is a yearly Maintenance fee. If you are a Right-to-Copy user at a branch of a larger company, you have two options. If you pay only the one-time Extra CPU surcharge, then you must obtain your support from your own corporate resources. If you wish to have support at your own location, you may obtain this by also paying the regular Maintenance fee. With this yearly support for Qedit, you are entitled to call with questions. Service also supplies you with a yearly update to Qedit.

Robelle Newsletter

Do you receive a copy of What's Up, DOCumentation?, our regular news memo about Robelle, MPE, and HP-UX? We distribute our news memos only to sites with current service. Your copy may be going to your corporate headquarters.

The lastest newsletter is also available from our Web site at www.robelle.com/newsletter/.

QLIB and Bonus Contributed Software

Qedit comes with an array of contributed software in the QLIB library (in the QLIB groups of the Robelle account). The tools in QLIB, such as Prose to print manuals, can be extremely handy. As well, your Robelle license may entitle you to receive our Bonus programs: Compare/iX, a file comparison tool, HowMessy, an analyzer for database efficiency, Select, a menu processor, Spell, an English spelling checker, and Xpedit, a VPLUS text editor.

If you have the Bonus programs, you may only use them on appropriately licensed CPUs; you may not give a Bonus program away. However, QLIB programs may be used on any CPU and given away freely.

To browse through the Robelle account, including QLIB, use our Select "menu" program. Select allows you to run programs, get help, and print manuals, all without knowing any MPE commands.

:run select.pub.robelle,qlib

Compare/iX compares two text files (Keep or Qedit format) and prints out the differences. The basic comparison unit is a line. Compare/iX identifies three types of differences: lines that are in the first file but not in the second; lines that are in the second file but not in the first; and lines that are in both files, but don't match. There is no Classic version of Compare/iX for MPE V.

HowMessy analyzes a database and prints a report on its internal efficiency, 10 to 20 times faster than similar programs. To access HowMessy, log on as the database creator in the same group as the database and enter:

:file loadrept;dev=lp;cctl

:run howmessy.pub.robelle

Enter database:CUSTMR

Spell is a spelling checker that reads a file and produces a list of misspelled words. Spell comes with an 80,000 word English dictionary, and you can add your own words into global or local auxiliary dictionaries. Spell reads Qedit files, and has an option to generate an error file that is compatible with the :Editerror command.

Notation

This manual uses a standard notation to describe commands. Here is a sample definition:

            VERIFY          [ @ | ALL ]

            [ keyword ...]

UPPERCASE - If the commands and keywords are shown in uppercase characters in a syntax statement, they must be entered in the order shown (example: ALL). However, you can enter the characters in either uppercase or lowercase.

1.     Lowercase, highlighted - These are "variables" to be filled in by the user (example: keyword). The variables may be highlighted by underlining or italics. Each such "variable" is defined elsewhere (see the "Qedit Glossary" on page 393 when you have trouble). In the Help command, highlighting is not available, so these variables appear simply in lowercase.

2.     Brackets - enclose optional fields (example: [ALL]).

3.     Braces - enclose comments which are not part of the command. However, braces and comments are accepted in actual Qedit commands.
/listq filename {Q means without line numbers}

4.     Up lines - separate alternatives from which you select (example: SET CHECK [ON|OFF]). The choices are sometimes listed on several lines without "up lines".

5.     Dot-dot-dot (...) - indicates that the variable may be repeated many times in the command.

6.     Other special characters - literal symbols that must appear in the command as they appear in the manual (for example, "=" in Add linenum = rangelist).

In examples, there is an implied Return key at the end of each line.

Control characters, generated by holding down Control while striking another key, are either spelled out (e.g., Control-H) or abbreviated with a circumflex prefix (e.g., ^H).

When Qedit asks you a question, the default answer is shown in [brackets]. The default is the answer that Qedit will assume if you press only the Return key.

 

 Highlights In Version 6.0

This is an overview of all the changes implemented in this version.

      The Find command could potentially abort when printing the caret indicating where a string was located, if the record size and display size were greater than 132 bytes and the string found was beyond 132 bytes.

 Highlights In Version 5.9

      UDCs would stop working properly if a Calc command longer than 138 characters was entered.

 

Highlights In Version 5.8

        Text command. The text command would fail with Integer Divide by Zero error when texting in some variable length or bytestream files.

 

        Regular Expressions. Qedit would improperly report the error "String longer than maximum allowed" if the expression specified is longer than the window of the rangelist.

 

Highlights In Version 5.7

      MPE commands with long Info= string do not cause stack corruption anymore.

      A rangelist can now have an AND keyword with up to 10 search strings. All strings must be found on a single line for the line to be selected. Each string can have its own search window.

The following enhancements have been implemented in the Qedit for Windows server.

      The server correctly returns error 90 when the modified record length is greater than the maximum allowed in the current workfile.

 


Installing Qedit

General Installation Notes

Here we describe how to install and configure Qedit, and how to integrate it with your compiler tools. The following are general notes about installing Qedit.

Who Should Use These Instructions?

Use the following installation instructions if you have just purchased Qedit and are installing it for the first time. If you already have Qedit on your system, and are installing an update or pre-release of Qedit, you will find specific installation instructions in the change notice included with your tape.

Summary of Installation Steps

To install Qedit, follow these steps:

1.     Install Qedit

2.     Install the QLIB and/or Bonus programs

3.     Fix the NM compilers (XL only)

4.     Fix the MPE V compilers (both systems)

5.     Save disc space (optional)

Qedit Compiler Interfaces

Qedit edits compact files of a special format called workfiles. In order to be able to compile these files without doing a Keep command, you must "fix" the MPE compilers. This applies to the Classic 3000 compilers (CM), which might exist on either an MPE V or MPE/iX system, and the NM compilers on MPE/iX only. The methods and installation steps are quite different between the CM and NM Qedit compiler interfaces.

Many third-party tools either read Qedit files already (e.g., PowerHouse, MPEX) or can be altered to read Qedit files (techniques for doing this are discussed here).

Important Note About Passwords

None of the jobs that we supply have passwords in them. Before streaming a job, you may have to add your system's passwords to the first line. Users of MPE XL version 3.0 and higher do not have to do this because the operating system prompts for missing passwords. The same is true for some MPE V users who have security software that inserts passwords. Most MPE V users have to edit the jobs. For example, if the system manager logon password is Qwerty, you would do the following:

:editor

HP32201A.07.22 EDIT/3000

/text robelle.job.robelle

FILE UNNUMBERED

/modify 1

MODIFY     1

!job robelle,manager.sys,pub;hipri

                        i/qwerty

!job robelle,manager.sys/qwerty,pub;hipri

 

/keep robtemp

/exit

END OF SUBSYSTEM

:stream robtemp

:purge robtemp

STREAMX Users

Users of STREAMX, a part of SECURITY/3000 from VESOFT Inc., must set a Job Control Word before streaming jobs. This step prevents STREAMX from generating an error if the Robelle account does not yet exist. For example,

:setjcw streamxtempnonest 1

:stream robelle.job.robelle

Step 1: Install Qedit

This step requires three separate procedures: restoring all Robelle files from tape to disc, building (or upgrading) the Robelle account using the job stream that we provide, and streaming the installation job stream. All these procedures can easily be accomplished if you log on as Manager.Sys.

Restore Files

First, you have to restore all the Robelle files from tape.

:hello manager.sys                 {log on as system manager}

:file rtape;dev=tape               {mount Robelle tape}

:restore *rtape; @.@.@; create     {=reply on the console}

Check the :Restore listing for files that could not be restored because they were busy for any of the following reasons: someone was using them, they are held as suspended son processes (menu system), they are allocated, or someone was backing them up! Chase away any users and deallocate any busy programs. Then try the :Restore again.

Create/Update Robelle Account

You must build (or upgrade) the Robelle account with the job stream we provide. Stream the job that builds and updates the Robelle account.

:stream robelle.job.robelle

If the Robelle account already exists on your system, the installation job preserves the current passwords.

If the account does not exist, it is created with the password XXXX. The Mgr.Robelle user does not have a password. You should change the passwords to something that will be hard for outsiders to guess.

:altacct robelle;pass={robelle account password}

:altuser mgr.robelle;pass={mgr.robelle user password}

Please note that during installation, we add OP capability to the Robelle account. When the Qedit installation is complete, you can, if you wish, remove the OP capability.

File Names

The Qedit program files are located in the Pub group of the Robelle account. These are the names of the various files:

Qeditnm

 

NM Qedit program

Qeditcm

Qeditpm

CM Qedit programs

Qcompxl

 

NM compiler interface

Qedify

Qcompusl

CM compiler interface

Qloadxl

 

NM Qedit options

Ederrnm

Ederrcm

:Editerror support

Qmap

 

reformat MPE V PMAP

 

Install Program Files

Our installation job installs Qedit. No one can be using these programs when you do the installation. Warn people not to use Qedit for a while, and then stream our installation job:

:hello mgr.robelle

:warn @;please exit from Qedit NOW!

 

:stream install.qeditjob   {supply passwords}

Check the installation job $stdlist. If anyone was using Qedit or attempting to back it up, the job will fail. Chase away any users, ensure that backup is not in progress, then stream the installation job again.

The installation job renames your current versions of Qedit to the PubOld group of the Robelle account. If you need to move these versions back into production, use the Previous.QeditJob job stream.

You can now access Qedit by entering

:run Qedit.pub.robelle

If you wish to print manuals, move Qedit to another account, read on in this chapter for instructions.

Step 2: Install QLIB and Bonus Programs

Qedit comes with an array of contributed software in the QLIB library (in the QLIB groups of the Robelle account). QLIB programs may be used on any CPUs and given away freely. Your Robelle license may also entitle you to receive our Bonus programs: Compare/iX, HowMessy, Select, Spell, and Xpedit. These programs reside in the Pub group of the Robelle account. Bonus programs can only be used on authorized machines, and you may not distribute them to your friends.

If you received Bonus programs with this version of Qedit, use the job stream called Bonus.Job.Robelle to install both the QLIB and Bonus programs. If you did not receive Bonus programs, use the job stream Qlib.Job.Robelle to install the QLIB programs. If you skip this step, you may end up running old versions of these programs.

:hello mgr.robelle

:stream bonus.job.robelle       {or Qlib.Job.Robelle}

Building the Spell Dictionary

The Spell Bonus program requires an additional install job to build its main dictionary. This job is required if you want to use Spell, and the Spell and Words commands in Qedit. By default, the American spellings are used. To use British spellings, modify the line that sets the SpellAmerican JCW so that the JCW is set to False. This job stream could take 30 to 60 minutes to complete; there is no reason to wait for it to finish before going on to the next step.

:run qedit.pub.robelle          {or use :Editor}

/text dictmain.spjob

/modify "setjcw SpellAmerican"  {for British spelling,     }

/keep robtemp                   {      change True to False}

/exit

:stream robtemp

:purge robtemp

See the Spell user manual for more information on using Spell.

Step 3: Install NM Compiler Interface

On MPE/iX, if you use any NM compilers, you will want to install the new NM compiler interface. If you still use the CM compilers as well, you will want to install that compiler interface too, as described under step 4.

Installing the Interface

Assuming that you have Restored the Robelle files onto your system and that you have not done this step before, stream Savecmdf.Qeditjob to make backup copies of the existing HP command files in the Stdcmd.Sys group. You need to know the Manager.Sys password:

:stream savecmdf.qeditjob.robelle {wait for it to finish}

:listf @.stdcmd.sys

Then stream Qcompxl.Qeditjob to make changes to the Pub.Sys compiler command files.

:stream qcompxl.qeditjob.robelle

This stream makes the following changes to the files:

1.     Change the run of the compiler program to

;xl ="qcompxl.pubnew.robelle, qcompxl.pub.robelle",

2.     Add ";shr" to the File commands for the text and master files.

Compiling Instructions

At any point, either within Qedit or at the MPE/iX prompt, you now should be able to compile a Qedit file or a Keep file, just by invoking the normal command file:

:pasxl source                {from MPE}

:run qedit.pub.robelle

/pasxl source                {from Qedit}

Within Qedit, you can specify "*" for the current workfile:

:run qedit.pub.robelle

/text source

/pasxl *

/exit

:pasxl qeditscr

Step 4: Install CM Compiler Interface

When installing Qedit on MPE/iX, you may have to install the NM compiler interface (described earlier) and the CM compiler interface (described here). MPE V, on the other hand, has only the original "CM" compilers to worry about. After Restoring the files from tape, you have to choose an installation method: integral or isolated.

Choosing a CM Installation Method

There are two methods of fixing the compilers on your system: integral into Pub.Sys or isolated in the Robelle account. The isolated method is best for new or trial-period users, because it is faster to install and easier to remove later. You can start with the isolated method and convert easily to the integral method later.

Integral Method. The compilers in Pub.Sys are "fixed" directly and a segment is added to the System SL. The standard :Cobol and :Pascal commands of MPE will then compile Qedit workfiles. :Sysdump is used to make a new cold load tape for the next time you must boot the system.

Isolated Method. The MPE compilers are copied into the Q.Robelle group and the original compilers are left in the Pub.Sys group. No code is added to the System SL. Because the "Qedit" compilers are not in Pub.Sys, you cannot compile Qedit workfiles except from within Qedit.

Integrating CM Compiler Changes

The job stream Qeditj1.Qeditjob.Robelle makes integral compiler fixes. Use it either to update the fixes to a new version or to re-install the fixes after a MPE update from HP. Because this job modifies the compiler program files in Pub.Sys, you should :Store @.Pub.Sys before starting and save the tape. You need another small tape for a new cold load tape.

Ensure that no one compiles until the installation is complete. Stop all jobs and send an operator warning. Log on as Manager.Sys, modify the first line of the Qeditj1 job to include the passwords, then :Stream the job.

:stream qeditj1.qeditjob.robelle

The job runs Qedify.Pub.Robelle to update the compilers in Pub.Sys and install nonprivileged hooks into them, so that they can access Qedit workfiles. The job adds a code segment from Qcompusl.Pub.Robelle into Sl.Pub.Sys and then requests a tape mount for a new cold load tape.

Mount a tape with a write ring and :Reply. Save this tape and use it for any future cold loads. The CM compiler interface is now installed. Compiles done inside or outside Qedit work on either Qedit workfiles or on regular Keep files.

Isolating CM Compiler Changes

The job stream Qeditj1a.Qeditjob.Robelle fixes the compilers, but isolates the changes in the Q.Robelle group. Ensure that no one compiles until the installation is complete. Stop all jobs and send an operator warning. Modify the first line of Qeditj1a to include the Robelle password, then stream the job:

:stream qeditj1a.qeditjob.robelle

The job uses Qedify.Pub.Robelle to copy the compilers from Pub.Sys to the Q.Robelle group, then "fix" them to read Qedit files. The original compilers in the Pub.Sys group are not modified. Once this step is completed you can use the CM compilers on Qedit files from within Qedit, but not at the MPE prompt.

Step 5: Saving Disc Space

There may be obsolete or unnecessary files in the Robelle account that you can remove to save disc space.

Purging Obsolete Files

If you have been a Qedit user for several years, you may have obsolete files in the Robelle account. For example, the file Qapply.Doc.Robelle is an older version of part of the Qedit User Manual. It should be purged.

To remove all obsolete files that were part of the Qedit product, stream the job Obsolete.Qeditjob.Robelle.

Minimal Set of Files

If you are extremely short of disc space, you can purge many files in the Robelle account after you complete all installation steps. The only files you must have to run Qedit are those listed below. Of course, if you have other Robelle products such as Suprtool, you do not want to purge the files needed for them, which are listed in their User Manuals.

Filename

Purpose

qedit.pub.robelle

 

qloadxl.pub.robelle

optional NM run-time

qeditpm.pub.robelle

allows BS priority

qcompxl.pub.robelle

MPE/iX only

qedify.pub.robelle

CM compiler interface

qcompusl.pub.robelle

CM compiler routines

@.q.robelle

copies of CM compilers

qedit.help.robelle

 

qedhint.help.robelle

 

qzmodhlp.help.robelle

 

qmap.pub.robelle

for QMAP in :Prep command

prose.qlib.robelle

to print manuals, you need this

f92286f.qlibdata.robelle

and at least one font files

 

There are a number of jobs in the Purgejob.Robelle group which can help clean up the Robelle account of unwanted files. One in particular that you may want to use is Cleanup.Purgejob.Robelle. After you have completed the Qedit installation, Cleanup gets rid of all the pre-installation files.

:stream cleanup.purgejob.robelle

Moving Qedit to Another Account

Although the Qedit program file is normally installed on the system Qedit.Pub.Robelle, you can move the program to any account and group that has PH and DS capability. There are some file names that are built into Qedit:

 

Filename

Purpose

qedit.help.robelle

the Qedit help text

qedhint.help.robelle

the hint-of-the-day file

qzmodhlp.help.robelle

help text for Qzmodify

qmap.pub.robelle

for QMAP option of :Prep

cobol.q.robelle

etc., the CM compilers

qeditmgr.pub.robelle

a configuration file

qloadxl.pub.robelle

NM run-time routines

 

Moving All the Files

Qedit follows the location of the program file in deciding what file names to open. If you move the Qedit program to the PUB group of the UTIL account, Qedit looks for the files listed above in that account rather than Robelle. If Qedit resides in a group named Pubnew (or Pubxxx), the three "help" files will be searched for in HELPNEW (or HELPxxx). The Qeditmgr file is always assumed to be in the same group as the Qedit program, while Qmap must be in the Pub group and the CM compilers in the Q group.

:hello mgr.util,pub

:fcopy from=qedit.pub.robelle;to=qedit.pub.util;new

:fcopy from=qloadxl.pub.robelle;to=qloadxl.pub.util;new

:fcopy from=qedit.help.robelle;to=qedit.help.util;new

:fcopy from=qedhint.help.robelle; &

       to=qedhint.help.util;new

:fcopy from=qzmodhlp.help.robelle; &

       to=qzmodhlp.help.util;new

:fcopy from=qmap.pub.robelle; &

       to=qmap.pub.util;new

Redirecting the File Names

The Verify Account command shows what account Qedit searches for the Qeditmgr file, Qmap.Pub, and the CM compilers. Use Set Account to override the default. The Verify Filename command shows the names assumed for the "help" files and Set Filename allows you to override them.

Suppose you run Qedit in the Util account, but you don't want to move the rest of the files to that account. You would use Set Account Robelle and Set Filename commands to force Qedit to look back into Robelle for the files instead of in Util.

Moving a "Hooked" Qedit

When you install MPEX and the Vesoft account, they make a copy of Qedit in Pub.Vesoft and "hook" it for closer cooperation with MPEX.

:run qedit.pub.vesoft;lib=p

Since Qedit looks for compilers, help files, and other supporting files in the same account where the program resides, the hooked Qedit looks for those files in the Vesoft account. If you are on MPE/iX and you want I/O redirection of command files, copy the file Qloadxl from Robelle to Vesoft. Put the following Set commands in a configuration file named Qeditmgr.Pub.Vesoft:

/set account robelle   {e.g., Cobol.Q.Robelle}

/set filename help qedit.help.robelle

/set filename hint qedhint.help.robelle

/set filename qzmodhlp qzmodhlp.help.robelle

/set extprog mpex.pub.vesoft com on

The Set Extprog command assumes that you want Qedit to explicitly pass % commands to MPEX, rather than have the "hook" intercept all % lines at every prompt in Qedit. It is desirable to handle % commands within Qedit this way, rather than through the hook, because it ensures that your current workfile is properly posted to the disc and it allows you to Add % commands into a file as data without executing them. To achieve this result, you must rehook Qedit with the Nopercent option:

:run mpex.pub.vesoft

%hook qedit.pub.robelle;nopercent     {SM or Vesoft logon}

You may not find that you need a hooked Qedit, now that Qedit has a :Listredo stack and accepts the VESOFT-style shorthand ("," for Redo). Some remaining benefits of hooking Qedit are that the System Manager can Keep across account boundaries (but watch out for Creator name), and ACD information is retained from Text to Keep.

Running the MPEXHOOKed Qedit

The MPEXHOOK procedure, which intercepts file system calls made by Qedit, is activated differently based on whether the program to be executed is a native-mode or a compatibility-mode program. On Classic systems, or on Spectrum systems running compatibility-mode or OCT-mode Qedit, you run the hooked program with lib=p.

:run qedit.pub.vesoft;lib=p

Lib=P works equally well with the native mode version of Qedit. However, with Qedit/iX, you can specify an XL file instead of the Lib parameter:

:run qedit.pub.vesoft;xl="mpexhknl.pub.vesoft"

The hooked version will work version either way. The Lib parameter is there for MPE compatibility reasons (Classic vs PA-RISC). The XL file parameter is the "correct" way of doing it on MPE/iX.

The following sample User Command, which can be used to run the hooked version of Qedit, determines if Qedit is native-mode or compatibility- mode, and invokes it accordingly.

parm runparm=0

if finfo("qedit.pub.vesoft",9)="NMPRG" then

   run qedit.pub.vesoft;xl="mpexhknl.pub.vesoft";parm=!runparm

else

   run qedit.pub.vesoft;lib=p;parm=!runparm

endif

VESOFT advises that you be running MPEX version 23.11115 or later, so that the Keep-across-accounts feature will work properly with Qedit/iX.

If Qedit/iX aborts with quit parm -50 or -1041, this indicates that the MPEXHOOK support routines are not correctly installed on your system. You will have to stream the VESOFT-supplied job Veproc.Job.Vesoft. If the hooked Qedit/iX still aborts after running this job, you will need to contact VESOFT for a software update.

Removing the Compiler Interface

If you remove Qedit from your system, you will want to revert to the original MPE compilers. Once you remove the compiler interface you can no longer compile Qedit workfiles. you may either Keep them with Qedit, or use the contributed program Qcopy.Qlib.Robelle to convert them to Keep files.

If you did an integral installation of the CM compiler interface, you now do an integral removal. If you did an isolated installation, you now do an isolated removal.

Removing the NM Interface

Reverting to the original NM compilers is a simple matter of going back to the original command files. You should have saved those in @.Stdcmd.Sys. Purge the command files in Pub.Sys, such as Pasxl, and Rename or Copy the originals from Stdcmd.Sys.

Removing the Integral CM Interface

Qeditj3.Qeditjob.Robelle removes the Qedit CM compiler interface that had been integrated into MPE. The original compilers are Restored and the CM Interface is removed from the system SL. If you are on MPE V, a new cold load tape is created.

Ensure that no one compiles for the next half hour. Stop all jobs and send an operator warning. Log on as Manager.Sys, modify the first line of the Qeditj3 job to include the passwords, then :Stream the job.

Qeditj3 first attempts to :Restore the original compilers from a backup tape (you can use the last Hewlett-Packard update tape). Mount the tape and :Reply on the console. It then removes the Qedit interface segment from Sl.Pub.Sys and requests a tape to make a new cold load tape. Please mount a blank tape with a write ring and :Reply. Save this tape and use it on your next cold load.

Removing the Isolated CM Interface

Qeditj3a.Qeditjob.Robelle removes the isolated CM compiler interface from the Robelle account, leaving you only the original ones in Pub.Sys. Ensure that no one compiles or uses Qedit until this job finishes. Stop all jobs and send a warning to all users. Modify the first line of Qeditj3a to include the Robelle account password and stream the job.

Qeditj3a purges fixed compilers from the Robelle account, removing the interface.


Getting a Quick Start with HP Full-Screen Editing

Introduction

Qedit aims to provide everything an MPE or HP-UX programmer could need to write COBOL, PowerHouse, or other programs, and to prepare documentation. Therefore, Qedit has Line mode for batch editing and full-screen mode for interactive editing. On HP terminals, Qedit's full-screen mode is called Visual mode.

Qedit's Visual mode is a powerful but friendly full-screen editor designed specifically for programmers. It gives you full access to the editing capabilities of your terminal in block-mode, with low system overhead. You can move, copy, mark and delete blocks of text with Visual's cut-and-paste functions, and page backward and forward through your file with function keys. To use Visual mode, you must have an HP terminal or an HP terminal emulator (e.g., Reflection from WRQ).

NOTE: As of HP-UX 11.0, HP has dropped support for block-mode terminals. For this reason, full-screen editing is only available in Screen mode on HP-UX 11.0 and later.

In Visual mode, you have access to all Line mode commands (including UDCs, command files, compiling, linking and running programs, shell scripts, and string searching and changing). Qedit's search and replace functions aim to be simple, fast and powerful (e.g., ignore embedded words, etc.). The Undo command allows you to cancel any previous edits to your file, working back to the state at which you started. Using the optional Open and Shut feature, you can switch between files instantly. With the Justify command, the Prose text formatter and the Spell checker, you can format documents such as memos and manuals.

Visual mode is a good introduction to the HP operating systems for users who don't work on HP computers all day. Those who may particularly benefit are novice users, or users who run Qedit only to update a report skeleton once a week. These occasional users no longer have to memorize editing commands. Visual mode provides a familiar environment where novices can make changes to the entire screen, just as they do on PC editors. You can even configure some electronic mail packages (HPDesk, elm), to put your users directly into Visual mode when they edit a message.

Starting Visual Mode

After you have invoked Qedit, and Texted or Opened a file, you switch from Line mode to Visual mode by typing VI or pressing F1. If you don't have a file open, Qedit opens a scratch file and, if empty, fills it with a screenful of blank lines.

 VI [ linenum | "string" ] or press F1

(Default: linenum = *)

Whereas in Line mode you type in command and text lines ending each with a Return, in Visual you edit a full screen of text in block-mode using the terminal keyboard. Since your terminal is off-line from the computer, you can use its cursor and editing keys. You edit by moving the cursor around the screen, inserting and deleting lines and characters. Press Enter to save your changes. To move through the file, you have the convenience of eight function keys, such as F6 Forward One Page.

Description: reflection-visual-screen-shot

Visual mode in Reflection for Windows, showing cut-and-paste indicators

You copy, move, hold, and delete blocks of text easily by placing "cut-and-paste" indicators at the start of the line. You may type Line mode commands at the home line ===> and execute them via the Enter or the F7 key. Combining the cut-and-paste functions with the Open and Shut commands, you can also copy and move text quickly between different Qedit files. Use the ZZ cut-and-paste indicator with any command to mark text easily.

The Set Visual command controls how Visual mode operates and allows great latitude in configuring Visual to your own liking. For example, you can choose to have automatic update; decide where the current line or cursor appears; and select how many lines will carry over when you page up or down.

When you are done, exit Visual mode using F8, then Keep or Shut your file. Press F8 again to leave Qedit.

Screen Layout

===>

Okay  1691.75  WFILE.DOC.TACCT  "verify"(u)  Move Ready

 *  procedure abc;

+1  begin

+2      integer def;

//  ....+....10...+....20...+...

 

The screen starts with the home Line, followed by the status Line, several text Lines, and ends with the template Line. Columns 3 and 4 of text lines sometimes contain special characters and are called the indicator columns.

Home Line

You type commands, search for strings and for line numbers after the ===> on the home line.

===>

These are executed when the F7 or Enter key is pressed.

The home line is also used by Qedit to print error messages. You must clear the error message by pressing the F7 or Enter key before you can type another command in the home line.

Status Line

The second line shows the status, the current line number (i.e., that of the * line), the name of the file you are editing, the current string with its window, and any pending cut-and-paste task.

Okay  1691.75  WFILE.DOC.TACCT  "verify"(u)  Move Ready

If you have Texted a file into Qeditscr, the status line shows the name of the Text file, which is also your default Keep file.

Text Lines

By default you see the * (current) line and 19 lines after it. Each line is prefixed by the relative line number, and two columns for special indicators.

 *  procedure abc;

+1  begin

+2      integer def;

Use Set Vis Above and Set Vis Below to adjust the number of lines shown above and below the current line.

Template Line

The last line has // and a column template. The // signals end-of-screen to Qedit and must not be erased.

//  ....+....10...+....20...+...

Visual uses more than 76 columns for text on Reflection, Qcterm, a 2393/97, 2626, or 700/9x terminals.

Special Indicator Columns

Qedit leaves columns 3 and 4 of the text lines for you to enter cut-and-paste operators (i.e., MM, CC, HH, etc.). Also, Qedit may print one of two special indicators in these columns:

!

line extends beyond the visible right margin

?

line contains control characters, shown as dots

An ! means the line extends beyond the right terminal margin. To shift the screen image left, type Set Left 55 at the Visual home line and press F7.

A ? means the line contains nonprinting characters such as Nulls, Escapes, Bells, Tabs or possibly Roman-8 extended characters. Qedit replaces these characters with dots (.) in Visual mode, and does not allow you to make changes. These ? lines are not updated when you press Enter.

To edit Bells, Escape sequences, Tabs, ShiftOuts and ShiftIns in Visual, use Set Vis Bell, Set Vis Esc, Set Vis Tab, Set Vis SO and Set Vis SI. All these specify substitute characters to be shown instead of dots. To edit other control codes, use Modify or Change from the ===> line. If you turn Set Editinput Extend Off, Qedit regards Roman-8 characters as nonprinting noise and show them as dots.

Using Your Keyboard

In Visual mode, the keyboard gives you the power to move around the screen, edit text, and control the flow of Qedit.

Moving the Cursor

You move around the screen using the cursor keys and others:

 

Cursor Left

Move one space to left

Backspace

Move one space to left

Cursor Right

Move one space to right

Cursor Up

Move one space up

Cursor Down

Move one space down

Return

Down to next line, back to column 5

Home Up

Move to ===> line

Shift-Home

Move to bottom of screen

Tab

Move to next right Set TAB column

Shift-Tab

Move to next left Set TAB column

Prev Page

Only moves around terminal memory

Next Page

Only moves around terminal memory

 

Editing the Text Lines

You revise the screen image using these keys:

 

Space bar

Move cursor right and erase character

any char

Overwrite cursor and move it right

Del Char

Remove character at current cursor

Ins Char

Enable "insert"; use again to disable

Ins Line

Insert blank line above current line

Del Line

Delete line at current cursor

Clear Line

Erase to the end of the line

Clear Display

Avoid! Recovery: Home Up,*,F7

 

To save the changes you have made on the screen,

 

Enter

Send screen image to Qedit, update file

 

Control Functions

To return from Visual mode to Line mode:

 

F8

exit from Visual

 

Some other keys:

 

Select

Useless in Qedit

Stop

Do not use in Visual

Break

Disabled in Visual

Reset

Use if screen locks up, press Enter

Esc

First key of Escape sequences

Del

Does not delete anything!

 

Reflection for DOS Keyboards

If you are using a PC with Reflection for DOS, you need to map the PC keys into the HP keys.

Note that the PC keyboard has two keys labeled Enter, which are used differently in Qedit. The Enter key above the Right Shift key is called the Return key in this manual, and is used to execute commands in Line mode. In Visual mode, this key moves the cursor down by one line. The other Enter key (on the numeric keypad) is called the Enter key, and is used to update the screen in Visual mode.

Here are the default Reflection keystrokes for common functions:

 

Terminal Keyboard

Reflection Key Sequence

Enter

Enter on the numeric keypad. If that doesn't work, try the "+" on the numeric keypad, or try Shift-F10

Home Up

Control-Home

Shift-Home

Control-End

Ins Line

Alt-I

Del Line

Alt-D

Clear Line

Alt-K

Clear Display

Alt-J (avoid in Visual!)

User keys

F9

System keys

F10 (then F7 for help)

 

Additional Functions

Reflection Key Sequence

Begin Line (Column 1)

Home

End Line

End

Help about Reflection

Alt-H

Exit

Alt-X

 

Other PC Keyboards

AdvanceLink is similar (Alt-H is help, Alt-I is Insert Line, Alt-D is Delete Line), but Clear Line is Alt-L, and Enter is Alt-F3. Other terminal emulators have their own keystrokes for common functions. See your emulator's manual for details.

Function Keys

Much of the convenience of Visual mode is due to the power built into the eight user function keys: F1 through F8.

F1

Update and go to next page

F2

Roll Up Screen n lines, as per Set Vis Roll

F3

Findup (search back for current string)

F4

Find (search ahead for current string)

F5

Backward One Page

F6

Forward One Page

F7

Execute command typed in ===> line

F8

Exit from Visual back to Line mode

 

F1: Update and Go to Next Page

Qedit reads the current page and updates the file, then displays the next page. The F1 key combines the Enter key and F6 (Forward) in a single key. However, F1 does not execute any command typed in the home line as the Enter key would.

F2: Roll Up Screen

Qedit clears the screen and displays a new one that is rolled up n lines (default: 6), where n is controlled by Set Vis Roll.

F3: Findup - Previous String

Qedit searches backward in the file, starting from the * line, until it finds a line that contains the current string. Qedit clears the screen and displays a new page, with * positioned at the line that contains the found string. Visual also displays the target string on the Status line.

Before you can use F3, you must establish the string for which to search. Type the string in quotes prefixed by a circumflex (^"string") at the ===> on the home line and press F7, to do the first Findup.

F4: Find - Next String

Qedit searches forward in the file, starting from the * line, until it finds a line that contains the current string. Qedit clears the screen and displays a new page, with * positioned at the line that contains the found string. Visual also shows the target string on the Status line.

Before you can use F4, you must enter the target string. Type the string in quotes ("string") at the ===> on the home line and press F7, to do the first Find.

F5: Backward One Page

Qedit clears the screen and displays the previous page. By default, the top line of the original screen becomes the bottom line of the new screen. Use Set Vis Carry to change the number of lines carried over to the new screen.

F6: Forward One Page

Qedit clears the screen and displays the next page. By default, the bottom line of the original screen becomes the top line of the new screen. Use Set Vis Carry to change the number of lines carried over to the new screen.

F7: Execute a Command

Use the F7 key to execute commands. The current screen is not updated, unless you have Set Vis Update On. Type whatever command you want to execute after the ===>. This includes "strings" to find, Qedit Line mode commands such as Open or Justify, MPE commands, calculator commands (=5/6), and special Visual commands (e.g., * for Refresh, ? for Help). Then press F7. Qedit reads only the home line and executes the function. To first save your screen changes and then execute, use Enter instead of F7.

See the section "Home Line Commands" for complete details.

F8: Exit from Visual

To return from Visual mode to Line mode, use the F8 key. Press F8 again once you are in Line mode to exit Qedit and return to MPE (: prompt). If for some reason F8 fails to exit from Visual, type / at the ===> and press F7 or the Enter key. This should get you back to Line mode.

Browsing Through Your File

Line Number. Move to a specific line (e.g., to line 45).

===>45 F7

> and <. Move ahead or back a page. Use with a number to move several pages (e.g., ahead 3 pages).

===>>3 F7

+ and -. Move forward or backward any number of lines (e.g., back 200 lines). If you do not specify a number, the default is the number of lines configured by Set Vis Roll.

===>-200 F7

~ The Tilde Key. Return to the "most recent" screen. If you jump from line 1500 to line 451, ~ sends you back to 1500. This is handy if you jump briefly to another part of your file to check something then want to get back to your original location.

The tilde is also available from line-mode but it has to be enabled by removing it from the list of string delimiters. In order to do this, you could do the following:

/V stringd

Set STRINGDelimiters "|\~{}[]_@?!#>%&:'"

/S stringd "|\{}[]_@?!#>%&:'"

Notice that tilde has been removed from the delimiter list entered on the Set command.

===>~ F7

FIRST and LAST. Move to start or end of file.

===>first F7

Scrollup Character. This character can be entered in the cut-and-paste columns to scroll up in the file. A single character scrolls the number of lines defined by Set Visual Roll. If the character is entered more than once, Qedit scrolls up that many times the number of Roll lines. For example, enter 4 minus signs anywhere to scroll 4 X Roll lines. The default scrollup character is a minus sign. It can be changed to something else with Set Visual Scrollup.

Cut-and-Paste

It is never necessary to remember line numbers in full-screen mode. Visual allows you to mark, hold, move, copy, replicate, or delete a block of text, all visually. This is called "cut-and-paste" and is done by putting special indicators in the two blank columns at the left of each text line before you press the Enter key. For example, DD indicates a block of text to be deleted.

Cutting Operations

Order Is Not Important (But One at a Time). You can enter the indicators in any order and on different screens, but 10,000 is the maximum number of lines you can cut. When you have defined a complete cut-and-paste task, Qedit completes the task and removes the indicators. You can only perform one cut-and-paste task at a time.

Single Line

Block of Text

Function

M

MM

Move line or block of text

C

CC

Copy line or block of text

D

DD

Delete line or block of text

H

HH

Hold a line or block of text

 

HJ

Append block of text to Hold file

 

JJ

Justify a block of text

Z

ZZ

Mark a line or block of text

 

XX

Exclude a block of text from the display

 

Pasting Operations